Repair Procedure For Roof/Body Seams

Required Parts: 

• Paintable Clear Seam Sealer

Potential Parts Required: 

• Molding - Roof Ditch Right
• Molding - Roof Ditch Left

1. Gain access to the A-pillar body seam and roof ditch seam by removing the windshield A-pillar molding and roof ditch molding.
   NOTE:

   Dashed line indicates starting and ending points (path) for clear sealer.

2. Using the diagram above apply Paintable Clear Seam Sealer along the whole length of the roof ditch (1), beginning at the A-pillar (3) and ending at the Roof to Aperture/Rap Joint (2). Be certain to cover any and all pin holes.

   Courtesy of CHRYSLER GROUP, LLC

3. Prior to re-assembly, re-test the area to be certain it is properly sealed.
4. Reinstall windshield A-pillar molding and Roof Ditch molding.