Heads Up Display

REMOVAL 

1. Remove the Instrument Panel Pad. Refer to PAD, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

   2 - Heads Up Display (HUD) Module

   3 - Instrument Panel Carrier

2. Remove the fasteners securing the HUD Module to the instrument panel carrier.

   Courtesy of CHRYSLER GROUP, LLC

   1 - HUD Module

   2 - Wire Harness Connectors

3. Lift the HUD up far enough to gain access to the wire harness connectors.
4. Disconnect the wire harness connectors and remove the HUD from the instrument panel carrier.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• All fasteners are tightened securely.