LEMON Manuals
: Even more car manuals for everyone
Home
>>
Jeep
>>
2024
>>
Wagoneer Carbide, RWD
>>
Repair and Diagnosis
>>
Restraints
>>
Seat Belts
>>
Occupant Restraint Controller (Orc) - DTCS B0030-13 To B0050-95
>>
DTC Troubleshooting
>>
B0050-13-Driver SEATBELT Sensor-Circuit Open
>>
Set Condition
Set Condition
If the ORC detects the seat belt buckle switch circuits have been open. The active code will change to stored after the ORC verifies the seat belt buckle switch signal circuit voltage has returned to normal voltage range.