Torque Specifications - Fuel System

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.

FUEL PUMP / FUEL LINE

Courtesy of CHRYSLER GROUP, LLC

TORQUE SPECIFICATIONS - FUEL PUMP / FUEL LINE

CALLOUT	DESCRIPTION	SPECIFICATION	COMMENTS
1	High Pressure Line at High Pressure Fuel Pump	30 N.m (22 Ft. Lbs.)	-
2	Fuel Line Bracket to Cylinder Head Bolt	12 N.m (9 Ft. Lbs.)	-
3	Fuel Line Bracket to Engine Block Stud	50 N.m (37 Ft. Lbs.)	-
4	High Pressure Fuel Pump to Engine Block Bolts	25 N.m (18 Ft. Lbs.)	Pump must be held down ant the bolts hand tightened in half turn increments until final torque is achieved.
5	Fuel Line Bracket to Engine Block Bolts	50 N.m (37 Ft. Lbs.)	-

FUEL LINE / FUEL RAIL / ACCELERATOR PEDAL

Courtesy of CHRYSLER GROUP, LLC

TORQUE SPECIFICATIONS - FUEL LINE / FUEL RAIL / ACCELERATOR PEDAL

CALLOUT	DESCRIPTION	SPECIFICATION	COMMENTS
1	High Pressure Fuel Line Retainers	12 N.m (9 Ft. Lbs.)	-
2	Fuel Rail to Cylinder Head Bolts	25 N.m (18 Ft. Lbs.) in sequence	Hand tighten in sequence then torque in sequence Courtesy of CHRYSLER GROUP, LLC
3	High Pressure Line at Fuel Rail	30 N.m (22 Ft. Lbs.)	-
4	Accelerator Pedal Bolt	9 N.m (80 In. Lbs.)	-

FUEL FILLER NECK / FUEL FILLER TUBE

Courtesy of CHRYSLER GROUP, LLC

TORQUE SPECIFICATIONS - FUEL FILLER NECK / FUEL FILLER TUBE

CALLOUT	DESCRIPTION	SPECIFICATION	COMMENTS
1	Fuel Filler Neck to Body Bolt	9 N.m (80 In. Lbs.)	-
2	Fuel Filler Tube to Body Nut	9 N.m (80 In. Lbs.)	-
3	Fuel Filler Pipe to Filler Clamp	3 N.m (27 In. Lbs.)	-
-	Fuel Pump Control Module Bracket to Body Nut	5 N.m (44 In. Lbs.)	-
-	Fuel Pump Control Module to Bracket Nut	5 N.m (44 In. Lbs.)	-

FUEL TANK STRAPS

Courtesy of CHRYSLER GROUP, LLC

TORQUE SPECIFICATIONS - FUEL TANK STRAPS

CALLOUT	DESCRIPTION	SPECIFICATION	COMMENTS
1	Fuel Tank Strap to Frame Nuts	48 N.m (35 Ft. Lbs.)	-