Torque Specifications - Front Engine
WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - FRONT ENGINE
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 2 7 |
Front Cover to Engine Stud Bolt Timing Cover Bolts M8 Stud Bolts Timing Cover M6 Bolts |
11 N.m (8 Ft. Lbs.) in sequence 37 N.m (27 Ft. Lbs.) in sequence 11 N.m (8 Ft. Lbs.) in sequence |
Tighten in sequence |
| 3 | Wire Trough Retaining Stud Bolts | 22 N.m (16 Ft. Lbs.) | - |
| 4 | Idler Pulley Bolt | 25 N.m (18 Ft. Lbs.) | If removed for Timing Cover replacement idler pulley bolt MUST be install and torqued within 5 Minutes of RTV application |
| 5 | Accessory Drive Tensioner Bolt | 55 N.m (41 Ft. Lbs.) | - |
| 6 | Vibration Damper Bolt | 320 N.m (236 Ft. Lbs.) | - |
| 8 | Front Cover Bracket Bolts | 9 N.m (80 In. Lbs.) | - |