LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (3.0L - Engine (Service Information) (1 Of 5)) >> Technical Specifications >> Torque Specifications >> Torque Specifications - Engine Block

Torque Specifications - Engine Block

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.

MAIN BEARING CAP BOLTS / CONNECTING ROD CAP BOLTS / BLOCK BOLTS 

GC0205137Courtesy of CHRYSLER GROUP, LLC
TORQUE SPECIFICATIONS - MAIN BEARING CAP BOLTS / CONNECTING ROD CAP BOLTS / BLOCK BOLTS

CALLOUT DESCRIPTION SPECIFICATION COMMENT
1 Connecting Rod Cap Bolts Torque Procedure: 
  • Step 1 - Tighten bolts to 20 N.m (15 Ft. Lbs.) 
  • Step 2 - Using a torque angle gauge, torque all bolts an additional 90° 
 -
2 Main Bearing Cap Bolts Torque Procedure: 
  • Step 1 - Tighten bolts to 40 N.m (30 Ft. Lbs.) in sequence 
  • Step 2 - Using a torque angle gauge, torque all bolts an additional 90° in sequence 
 Tighten in sequence
GC0204486Courtesy of CHRYSLER GROUP, LLC
3
4		 Main Cap Tie Bolts (Long)
Main Cap Tie Bolts (Short)		 28 N.m (21 Ft. Lbs.) in sequence 
28 N.m (21 Ft. Lbs.) in sequence 		 Positions 8, 11 and 12
GC0204499Courtesy of CHRYSLER GROUP, LLC
 
 
 
5 Engine Block NVH Foam Bolt 9 N.m (80 In. Lbs.)  -
6 Piston Cooler Oil Jet Bolt 6 N.m (53 In. Lbs.)  -

REAR CRANKSHAFT OIL SEAL / BLOCK BOLTS 

GC0204510Courtesy of CHRYSLER GROUP, LLC
TORQUE SPECIFICATIONS - REAR CRANKSHAFT OIL SEAL / BLOCK BOLTS

CALLOUT DESCRIPTION SPECIFICATION COMMENT
1 Engine Lifting Studs to Engine Block Bolts 28 N.m (21 Ft. Lbs.)  -
2 Rear Crankshaft Oil Seal Bolts (1 through 6) 12 N.m (9 Ft. Lbs.) in sequence  Tighten in sequence
GC0204350Courtesy of CHRYSLER GROUP, LLC
 
scientia non olet · About LEMON Manuals