LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (3.0L - Engine (Service Information) (1 Of 5)) >> Technical Specifications >> Engine Specifications >> Intake Valves & Exhaust Valves

Intake Valves & Exhaust Valves

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
VALVES

DESCRIPTION SPECIFICATION
Metric Standard
Intake Valve Stem Diameter 5.462 - 5.480 mm 0.2150 - 0.2157 in.
Exhaust Valve Stem Diameter 5.452 - 5.470 mm 0.2146 - 0.2153 in.
Intake Valve Seat Angle - 44.5 - 45.0 degrees
Exhaust Valve Seat Angle - 44.5 - 45.0 degrees
Intake Valve Seat Width 1.15 - 1.45 mm 0.0452 - 0.0570 in.
Exhaust Valve Seat Width 1.55 - 1.85 mm 0.0610 - 0.0728 in.
Valve Face Run-Out 0.00 - 0.045 mm 0.0 - 0.0177 in.