Description - 3.0L Engine
WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
High output version shown, standard output version similar.
The 3.0 Liter in-line six cylinder turbocharged engine is a double overhead camshaft four valves per cylinder design. This engine is NOT free-wheeling; meaning that the pistons will contact the valves in the event of a timing chain failure.
The cylinders are numbered 1-6 from the front of the engine to the rear. The fuel system and catalyst system for the engine has two banks (bank 1 and bank 2). Bank 1 consists of the front 3 cylinders and bank 2 consists of the back 3 cylinders.
The engine firing order is as follows:
- Firing Order = 1-5-3-6-2-4
Some additional engine features include:
- Cylinder block and cylinder head are cast aluminum
- Camshaft driven high pressure fuel pump with direct in-cylinder fuel injection
- Variable displacement oil pump
- Variable intake and exhaust camshaft timing
- Charge air cooler
- Coil-on-plug ignition