LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (3.0L - DTCS U05AA-00 To U11E9-00) >> DTC Troubleshooting >> U060F-00-Lost Communication With Mass Air Flow Sensor >> Technical Data - MAF Sent Sensor

Technical Data - MAF Sent Sensor

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.

The information listed below is for MAF SENT Sensor systems:

Sensor feedback received by the Powertrain Control Module (PCM) from MAF SENT signal feedback.
MESSAGE  DEFINITION  INFORMATION 
Mass Air Flow (MAF). Mass Air Flow feedback. The MAF SENT Sensor sends the mass air flow reading to the PCM.
Intake Air Temperature (IAT). Intake Air Temperature feedback. The MAF SENT Sensor sends the intake air temperature reading to the PCM.
Turbocharger Inlet Pressure (TIP). Turbocharger Inlet Pressure feedback. The MAF SENT Sensor sends the turbocharger inlet pressure reading to the PCM.
Readiness Flag. Signal feedback initialized and readiness. The MAF SENT Sensor sends a signal readiness flag (TRUE) over the SENT signal wire when initialized, there is a good connection, and the sensor starts sending feedback to the PCM.