Ess Verification Test
WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
VERIFICATION OF REPAIR:
- Inspect the vehicle to make sure that all engine components are properly installed and connected. Reassemble and reconnect components as necessary.
- After repairs are complete, erase all DTCs with the scan tool.
- Operate the vehicle in accordance with the parameters and specific information found in the Monitoring Conditions and Theory of Operation of the DTC that was repaired. Perform at least ten Auto/Stop events.
- With the scan tool, verify that no DTCs have returned.
- If the DTC returned check for any service bulletins or star online cases that may apply. If no bulletins exist, return to and perform the DTC procedure.
- If the DTC or condition did not return, repair is complete.