LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (3.0L - Exhaust System) >> Shield, Heat >> Removal And Installation >> Rear Catalytic Converter Heat Shield >> Notes

Rear Catalytic Converter Heat Shield: Notes

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL 

GC0205276Courtesy of CHRYSLER GROUP, LLC
1 - Rear Catalytic Heat Shield
2 - Rear Catalytic Heat Shield Nut
3 - Rear Catalytic Heat Shield Bolt
  1. Remove the rear catalytic heat shield.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.

scientia non olet · About LEMON Manuals