LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (3.0L - DTCS P0521-00 To P058A-00) >> DTC Troubleshooting >> P0524-00-Engine Oil Pressure Sensor/System Rationality Check >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) provides a 5-Volt supply to the Engine Oil Pressure (EOP) Sensor on the sensor supply circuit. The PCM also provides a ground on the sensor return circuit. The Engine Oil Pressure Sensor signal can be a pull up (5.0 volts) or pull down (0.0 volts) resistor depending on the PCM internal hardware for the signal circuit. This EOP contains the oil temperature sensor.