LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (3.0L - DTCS P0333-00 To P0354-00) >> DTC Troubleshooting >> P034B-00-Crankshaft Position Sensor - Crankshaft Direction Incorrect >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
LOOSE CONNECTION AT THE CKP SENSOR HARNESS CONNECTOR
CKP SENSOR LOOSE OR MOUNTED INCORRECTLY
DAMAGED CKP TRIGGER WHEEL
CKP SENSOR

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  . 

scientia non olet · About LEMON Manuals