LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (3.0L - DTCS C0513-00 To P0010-00) >> DTC Troubleshooting >> C053D-00-Brake Pressure Sensor 1 Performance >> Component Functional Description-Brake Pedal Simulator Pressure Sensor

Component Functional Description-Brake Pedal Simulator Pressure Sensor

WARNING: This page is about a different car, the 2024 Jeep Grand Wagoneer L and 2024 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.

eBOOSTER SYSTEMS ONLY:  As the vehicle operator presses on the Brake Pedal on the eBooster system, the hydraulic/spring pressure is applied on the Brake Pedal Simulator Pressure Sensor. The Brake System Control Module (BSCM) monitors the signal from the Brake Pedal Simulator Pressure Sensor as one input to vehicle operator brake input. The Brake Pedal Simulator Pressure Sensor is rationalized against the signals from both internal Brake Pedal Position Sensor signals.

NOTE:

The Brake Pedal Simulator Pressure Sensor is internal to the Hydraulic Control Unit assembly and cannot be serviced separately.

scientia non olet · About LEMON Manuals