Mode Select Switch

REMOVAL 

1. Remove the Electronic Shift Module (ESM). Refer to MODULE, ELECTRONIC SHIFT (ESM), REMOVAL AND INSTALLATION .
2. Remove the fastener and remove the switch lever.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fastener

   2 - Switch Lever

3. Remove the fasteners and remove the mode select switch from the ESM.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.

• Tighten the Mode Select Switch fasteners securely.
• Tighten the Switch Lever fastener securely.