Standard Procedure - Fluid Drain And Refill

DRAINING: 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Position a drain pan under the transfer case.
3. Remove the transfer case fill plug.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fill Plug

   2 - Drain Plug

4. Remove the transfer case drain plug and drain the transfer case fluid.

FILLING: 

1. Install the transfer case drain plug and tighten to the proper torque specification.
2. Fill the transfer case to the bottom edge of the transfer case fill plug opening with the specified fluid. Refer to CAPACITIES AND RECOMMENDED FLUIDS, SPECIFICATIONS .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fill Plug

   2 - Drain Plug

3. Install the transfer case fill plug and tighten to the proper torque specification.
4. Wipe any excess fluid that may have spilled onto the exhaust.
5. Remove the support and lower the vehicle.