Section 43 (Hybrid Control Processor Module (HCP) - DTCS P0D27-00 To P0D93-00)

• DTC Troubleshooting
  • P0D27-00-Battery Charger 1 Input Voltage Too Low
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D2A-00-Battery Charger 1 Input Current Too High
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D33-00-Dc/Dc Converter Current High
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D37-00-Hybrid/EV Battery System Current High
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D57-00-Proximity Detection Circuit "A" Range/Performance
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D58-00-Proximity Detection Circuit "A" Low
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D59-00-Proximity Detection Circuit "A" High
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D85-00-Battery Charging Output Voltage Too High
    • High Voltage Warning
    • Diagnostic Test - Informational Only DTC
  • P0D92-00-Battery Charger Coupler Lock Control Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0D93-00-Battery Charger Coupler Lock Control Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test