Technical Data-Fuel Injectors
WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
The specifications listed below are for typical Fuel Injectors used on low pressure fuel systems:
| FUEL INJECTOR TECHNICAL SPECIFICATIONS | |
|---|---|
| Fuel Injector resistance | Typically between 9.0 and 18.0 Ohms. The resistance in a winding will vary with temperature. When checking a Fuel Injector coil it is good practice to compare the resistance of the suspect injector with the other known good injectors. Typically, the difference should be less than 10% between the injectors. |
| Fuel Injector current draw | Peak amperage draw will typically be around 1.0 amp when energized |