When Monitored
WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
This diagnostic runs continuously when the following conditions are met:
- Condition One:
- Ignition on.
- Output stages power supply is activated.
- Output stage is commanded to 0% Pulse Width Modulated (PWM).
- Condition Two:
- Output stages power supply is activated.
- Output stage is commanded between 5% and 95% PWM.
- Power supply voltage is within a calibrated range.
- Condition Three:
- Output stages power supply is activated.
- Output stage is commanded to 100% Pulse Width Modulated (PWM).
- Power supply voltage is within a calibrated range.