LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Grand Cherokee Summit >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (5.7L - DTCS P1128 To P1414) >> DTC Troubleshooting >> P1300-Crankshaft Position Learn Out Of Range >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
CAM/CRANK RELEARN PROCEDURE NOT PERFORMED
WIRE HARNESS ISSUE
CRANKSHAFT POSITION SENSOR (CKP)
TARGET WHEEL/PULSE RING

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  . 

scientia non olet · About LEMON Manuals