Engine Specifications: Camshaft

WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.

CAMSHAFT

DESCRIPTION	SPECIFICATION
	Metric	Standard
Bearing Journal Diameter
No. 1	61.655 - 61.680 mm	2.4273 - 2.4283 in.
No. 2	57.78 - 57.80 mm	2.2748 - 2.2755 in.
No. 3	57.38 - 57.40 mm	2.2590 - 2.2598 in.
No. 4	56.98 - 57.00 mm	2.2433 - 2.2440 in.
No. 5	43.613 - 43.633 mm	1.7170 - 1.7178 in.
Bearing To Journal Clearance Standard
No. 1	0.03 - 0.07 mm	0.0011 - 0.0027 in.
No. 2	0.050 -0.090 mm	0.0019 - 0.0035 in.
No. 3	0.040 - 0.080 mm	.0015 - 0.0031 in.
No. 4	0.050 - 0.090 mm	0.0019 - 0.0035 in.
No. 5	0.040 - 0.080 mm	0.0015 - 0.0031 in.
Camshaft End Play	.0080 - 0.290 mm	0.0031 - 0.0114 in.
Duration	290°
Valve Lift (@ zero lash)
Intake	13.75 mm	0.5413 in.
Exhaust	12.70 mm	0.5000 in.