Drive Line Support Fixture
WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the air cleaner body.
- Remove the left and right side radiator crossmember bolts.
- Assemble the (special tool #8534C-17, Kit, WL Engine Support).
- Install the WL engine support kit on the left and right strut towers and radiator support.
- Secure the (special tool #8534C, Fixture, Driveline Support) to the WL engine support kit using the U-bolts.
- Install the left and right side radiator support bolts to secure the fixture.
- Attach the lifting hook to the following locations:
- 2.0L - Install suitable engine lifting brackets to the engine and position a load-leveling lifting sling between the engine and an engine hoist.
- 3.6L - Remove the throttle body, connect to the hole in the top of the front timing cover.
- 5.7L - Remove the intake manifold, install and connect to the engine lifting fixture 8984C.