Diagnostic Overview - S/C Switch
WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
The S/C Switch performs diagnostics on the internal signal circuits. If a fault is detected the S/C Switch reports the fault to the SCCM over the LIN Bus circuit. If a speed control fault is present, verify that the switch has the proper Battery feed, ground and a good LIN Bus connection between the switch and SCCM or BCM depending on vehicle. If the circuits test good, the switch is the most likely cause of the DTC.