Checking Engine Oil Pressure
WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil pressure sensor. Refer to ENGINE OIL PRESSURE (EOP) SENSOR .
- Install gauge assembly (special tool #C-3292A, Gauge, Pressure).
- Run the engine until the thermostat opens.
- Oil Pressure:
- Curb Idle-25 kPa (4 psi) minimum amount of pressure to lubricate engine
- 1000 rpm-234 kPa (34 psi) for a VVT engine to activate VVT
- 3000 rpm-170 - 758 kPa (25 - 110 psi)
- If oil pressure is 0 at idle, shut off engine. Check for a clogged oil pick-up screen or a pressure relief valve stuck open.