LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Grand Cherokee Summit >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (8HP75 Automatic Transmission (Service Information) (2 Of 2)) >> Disassembly And Assembly >> Transmission And Internal Clutches >> (Torque Specifications - Internal Transmission)

(Torque Specifications - Internal Transmission)

WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION SPECIFICATION COMMENT
Hydraulic Impulse Solenoid (HIS) Bolts 27 N. m (20 Ft. Lbs.)  -
Output Speed Sensor Bolt 8 N. m (71 In. Lbs.)  -
Park Pawl Lock Rod Guide Plate Bolt 10 N. m (89 In. Lbs.)  -
Pawl Shaft Plug 35 N. m (26 Ft. Lbs.)  -
Shifter Control Support Nuts 10 N. m (89 In. Lbs.)  -
Transmission Oil Pan Bolts 10 N. m (89 In. Lbs.)  Tightening Sequence
GC0209113Courtesy of CHRYSLER GROUP, LLC
Transmission Oil Pan Drain Plug 9 N. m (80 In. Lbs.)  -
Transmission Oil Pump Assembly To Case Bolts Torque Procedure: 
  1. In order to seat the oil pump cover properly, pre tighten bolts one, seven and nine to 6 N.m (53 in. lb.)  .
  2. Working in a clockwise pattern, beginning with number one, tighten to 10 N.m (89 in. lb.)  .
  3. Working in a clockwise pattern, beginning with number one, tighten an 90°  .
 If removed, NEW  fasteners must be installed
GC0209110Courtesy of CHRYSLER GROUP, LLC
Transmission Oil Pump Housing To Cover Bolts 5 N. m (44 In. Lbs.) + 45°  If removed, NEW  fasteners must be installed
Tightening Sequence
Valve Body Bolts 8 N. m (71 In. Lbs.)  Tightening Sequence
GC0181792Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals