Transmission Cooler Line Quick Connect Fitting Disassembly/Assembly: Disconnect

WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.

Remove dust cap by pulling it straight back from the quick connect fitting.

Place disconnect, Special Tool

Disconnect, Transmission Cooler Line

Courtesy of CHRYSLER GROUP, LLC

Disconnect Tool

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

1 - QUICK CONNECT FITTING

2 - DUST CAP

3 - OIL COOLER LINE

4 - SPECIAL TOOL 8875A for 3/8" Line or 9546 for 1/2 " Line.

Slide disconnect tool down the transmission line and engage the fingers of the tool into the retaining clip. When properly engaged in the clip, the tool will fit flush against the quick connect fitting.
Rotate the disconnect tool 60° to expand the retaining clip.
While holding the disconnect tool against the quick connect fitting, pull back on the transmission cooler line to remove.