(Torque Specifications - Driveshafts)
WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
| CALLOUT | DESCRIPTION | SPECIFICATION | COMMENTS |
|---|---|---|---|
| 1 | Rear Driveshaft to Rear Pinion Flange Bolts | 56 N. m (41 Ft. Lbs.) | If removed, NEW bolts must be installed and tightened to specifications |
| 2 | Rear Driveshaft Center Support Bearing Bolts | 55 N. m (41 Ft. Lbs.) | If removed, NEW bolts must be installed and tightened to specifications |
| 3 | Rear Driveshaft to Transfer Case Flange Bolts | 56 N. m (41 Ft. Lbs.) | If removed, NEW bolts must be installed and tightened to specifications |
| 4 | Front Driveshaft to Transfer Case Flange Bolts | 56 N. m (41 Ft. Lbs.) | If removed, NEW bolts must be installed and tightened to specifications |