Dual Battery Switch Module (DBSM): Notes

WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL

Remove the right splash shield. Refer to FRONT WHEELHOUSE SPLASH SHIELD .
Disconnect the PCR Wire harness connector.

Courtesy of CHRYSLER GROUP, LLC

1 - PCR Wire Harness Connector

2 - PCR Bolts
Remove the bolts that secure the Dual Battery Switch Module (DBSM) to the Power Distribution Center (PDC).
Slide the Module out of the PDC.

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.