LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Grand Cherokee Altitude X, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (2.0L - Engine (Service Information) (3 Of 4)) >> Engine Block >> Standard Procedure >> Connecting Rod Side Clearance Check >> Feeler Gauge

Feeler Gauge

WARNING: This page is about a different variant/trim than selected.
  1. Slide a snug-fitting feeler gauge between the connecting rod and crankshaft journal flange. Compare the measured side clearance to the specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Repeat this procedure for each connecting rod. Rotate the crankshaft for connecting rod accessibility.
    GC0182559Courtesy of CHRYSLER GROUP, LLC
    1 - Feeler Gauge
scientia non olet · About LEMON Manuals