Section 30 (8P75PH Automatic Transmission - DTCS P0219-00 To P0713-00)

• DTC Troubleshooting
  • P0219-00-Engine OVERSPEED
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0562-00-System Voltage Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0563-00-System Voltage High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0601-00-Internal Control Module Memory Checksum Error
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0607-00-Ecu Internal Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0613-00-Internal Transmission Processor
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P061B-00-Internal Control Module Torque Calculation Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P062F-00-Internal Control Module EEPROM Error
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0642-00-Sensor Reference Voltage 1 Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0643-00-Sensor Reference Voltage 1 Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P064F-00-Unauthorized Software/Calibration Detected
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0667-00-Control Module Internal Temperature Sensor 1 Range/Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0668-00-Control Module Internal Temperature Sensor 1 Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0669-00-Control Module Internal Temperature Sensor 1 Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P06AC-00-Control Module Internal Temperature Sensor 2 Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P06AD-00-Control Module Internal Temperature Sensor 2 Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P06AE-00-Control Module Internal Temperature Sensor 2 Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0701-00-Transmission Control System Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0703-00-Brake Switch 2 Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0712-00-Transmission Fluid Temperature Sensor "A" Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P0713-00-Transmission Fluid Temperature Sensor "A" Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test