LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Grand Cherokee Altitude X, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (5.7L - Engine (Service Information) (2 Of 3)) >> Engine Cooling [EZH] >> Standard Procedure >> Draining

Standard Procedure: Draining

WARNING: This page is about a different car, the 2024 Jeep Grand Cherokee L. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Do not remove or loosen the coolant pressure cap, cylinder block drain plugs, or the draincock when the system is hot and under pressure because serious burns from the coolant can occur.

Using Radiator Drain 

NOTE:

The drain valve is located on the front of the radiator on the lower left side.

  1. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
  2. Position a drain pan, open the drain valve and drain the cooling system.
    GC0206896Courtesy of CHRYSLER GROUP, LLC
    1 - Radiator Drain
    2 - Drain Valve

Using Lower Radiator Hose 

  1. Remove the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
  2. Position a drain pan.
  3. Disconnect the lower radiator hose from the radiator and allow coolant to drain into the drain pan.