Antilock Brake System (Abs) (Continental) - DTCS C212A-17 To U0102-00

• DTC Troubleshooting
  • C212A-17-System Voltage High - Circuit Voltage Above Threshold
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-41-Anti-Lock Brake Module Internal - General Checksum Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-44-Anti-Lock Brake Module Internal - Data Memory Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-45-Anti-Lock Brake Module Internal - Program Memory Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-46-Anti-Lock Brake Module Internal - Calibration / Parameter Memory Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-47-Anti-Lock Brake Module Internal - Watchdog / Safety AUC Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-48-Anti-Lock Brake Module Internal - Supervision Software Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2200-49-Anti-Lock Brake Module Internal - Internal Electronic Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2202-00-Original VIN Mismatch / Missing
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2206-00-Vehicle Configuration Mismatch
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C220B-00-Abs Acc Valves Not Calibrated
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2212-00-Ecu In - Plant Mode
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2222-68-Improper Powerdown - Event Information
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2312-2A-Esp Off Switch - Stuck
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1DCB-72-Reverse Gear Switch - Actuator Stuck Open
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0002-00-Can C Bus Off Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U0056-00-Can Ch Bus Off Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U0100-00-Lost Communication With ECM/Pcm
  • U0101-00-Lost Communication With TCM
  • U0102-00-Lost Communication With Transfer Case Control Module / AWD