LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (6.4L - DTCS P0698 To P1500) >> DTC Troubleshooting >> P1300-Crankshaft Position Learn Out Of Range >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2023 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
CAM/CRANK RELEARN PROCEDURE NOT PERFORMED
WIRE HARNESS ISSUE
CRANKSHAFT POSITION SENSOR (CKP)
TARGET WHEEL/PULSE RING

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  . 

scientia non olet · About LEMON Manuals