LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (6.4L - DTCS P0304 To P0354) >> DTC Troubleshooting >> P032F-Combustion Engine Producing Insufficient Torque >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2023 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR POWERTRAIN CONTROL MODULE (PCM) DTCS 
    1. With the scan tool, read PCM DTCs.

      Are there any other PCM DTCs present?

      Yes 

      No 

      • Go To  2
  2. CHECK FOR ANY SERVICE BULLETINS OR PCM SOFTWARE UPDATES 
    1. Check for any applicable Service Bulletins or Flash updates related to the DTC or stall condition.

      Are there any applicable Service Bulletins or Flash updates?

      Yes 

      No 

      • Perform the START AND STALL CONDITION test procedure. Refer to the appropriate Service Information .
      • Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .