LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Wagoneer Carbide, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (3.0L - Engine (Service Information) (1 Of 5)) >> Technical Specifications >> Torque Specifications >> Torque Specifications - Valve Timing

Torque Specifications - Valve Timing

WARNING: This page is about a different car, the 2023 Jeep Grand Wagoneer L and 2023 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
GC0204911Courtesy of CHRYSLER GROUP, LLC
VALVE TIMING

CALLOUT DESCRIPTION SPECIFICATION COMMENTS
1 Actuator to Valve Cover 4 N.m (35 In. Lbs.)  -
2 Cam to Cam Guide 10 N.m (7 Ft. Lbs.)  -
3 Camshaft Oil Control Valve 180 N.m (133 Ft. Lbs.)  Hand tighten the OCV until flush with the phaser prior to torquing.
4 Secondary Timing Chain Guide Bolt 13 N.m (10 Ft. Lbs.)  -
5 Primary Timing Chain Guide Bolt 12 N.m (9 Ft. Lbs.)  -
6 Primary Timing Chain Tensioner Bolt 12 N.m (9 Ft. Lbs.)  -
7 Fuel Pump Camshaft Sprocket Bolt 65 N.m (48 Ft. Lbs.)  -
8 Fuel Pump Camshaft Retaining Plate Bolts Torque Procedure: 
  • Step 1 - Hand tighten all bolts 
  • Step 2 - Tighten bolts to 15 N.m (11 Ft. Lbs.) 
  • Step 3 - Torque bolts to 25 N.m (18 Ft. Lbs.) 
 Tighten in Sequence
GC0204984Courtesy of CHRYSLER GROUP, LLC
9 Secondary Timing Chain Tensioner Bolt 13 N.m (10 Ft. Lbs.)  -
scientia non olet · About LEMON Manuals