Torque Specifications - Air Intake System
WARNING: This page is about a different car, the 2023 Jeep Grand Wagoneer L and 2023 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
INTAKE MANIFOLD
INTAKE MANIFOLD
| CALLOUT | DESCRIPTION | SPECIFICATIONS | COMMENT |
|---|---|---|---|
| 1 | Engine Cover Mount to Intake Manifold | 8 N.m (71 In. Lbs.) | - |
| 2 | Throttle Body (ETC) to Intake Manifold | 10 N.m (7 Ft. Lbs.) | Use Crisscross Pattern Tightening Sequence |
| 3 | Intake Manifold to Cylinder Head | 10 N.m (7 Ft. Lbs.) in sequence | Tightening Sequence |
AIR CLEANER ASSEMBLY
AIR CLEANER ASSEMBLY
| CALLOUT | DESCRIPTION | SPECIFICATIONS | COMMENT |
|---|---|---|---|
| 1 | Band Clamps to Turbocharger Y-Pipe | Tighten Securely | - |
| 2 | Air Cleaner to Frame Rail | 6 N.m (53 In. Lbs.) | - |
| 3 | Air Cleaner Cover to Air Cleaner Housing | 5 N.m (44 In. Lbs.) | - |
| 4 | MAF Sensor to Air Cleaner Cover | Tighten Securely | - |
| 5 | Screw to H-Grommet (Resonator to Bracket) | Tighten Securely | - |
ENGINE COVER
ENGINE COVER
| CALLOUT | DESCRIPTION | SPECIFICATIONS | COMMENT |
|---|---|---|---|
| 1 | Engine Cover Bracket to Valve Cover | 6 N.m (53 In. Lbs.) | - |
| 2 | Engine Cover to Valve Cover Stud Nut | 8 N.m (70 In. Lbs.) | - |
| 3 | Engine Cover to Valve Cover | Tighten Securely | - |
| 4 | Engine Cover Ball Stud to Intake Manifold | 8 N.m (70 In. Lbs.) | - |