Positive Crankcase Ventilation (PCV) Valve
| COMPONENT INDEX |
The PCV Valve contains a spring loaded plunger. The plunger meters the amount of crankcase vapors routed into the combustion chamber based on intake manifold vacuum.
Shown below are the typical views of the PCV Valve operation.
When the engine is not operating or during an engine backfire, the spring forces the plunger back against the seat. This prevents vapors from flowing through the valve.
Engine Off Or Engine Backfire No Vapor Flow
When the engine is at idle or cruising, high manifold vacuum is present. At these times manifold vacuum is able to completely compress the spring and pull the plunger to the top of the valve. In this position there is minimal vapor flow through the valve.
High Intake Manifold Vacuum Minimal Vapor Flow
During periods of moderate intake manifold vacuum the plunger is only pulled part way back from the inlet. This results in maximum vapor flow through the valve.
Moderate Intake Manifold Vacuum Maximum Vapor Flow