LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Renegade Red >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.3L Engine (Service Information) (2 Of 2) >> Cylinder Head >> Rocker Arm, Valve >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the Variable Valve Actuator Assembly (VVAA). Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, REMOVAL AND INSTALLATION  .
    GC0200084Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Systematically replace the rocker arms (1) for the hydraulic lifters removed.

  3. Remove the rocker arms (1) by disengaging the pin retaining clip.
scientia non olet · About LEMON Manuals