LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Renegade Red >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.3L Engine (Service Information) (2 Of 2) >> Cylinder Head >> Lifter(S), Hydraulic >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the hydraulic tappets.
  2. Install the camshaft. Refer to CAMSHAFT, ENGINE, REMOVAL AND INSTALLATION  .
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals