Sunshade, Sunroof, Power: Adjustments

Courtesy of CHRYSLER GROUP, LLC

NOTE:

If the sunshade cannot be opened using the switch (2a), do not persist in using the switch, in order not to damage the sunshade motor.

If possible, using the sunshade switch (2a), open the sunshade to the full open end of travel.
Remove the sunshade motor
NOTE:
Use care when sliding the sunshade rearward to avoid jamming due to misalignment, as much as possible.
With the use of two operators in position, one on each of the two sides of the sunshade, carefully slide the sunshade to the rear end of travel.
Check that the sunshade is located at the full mechanical end of travel on both the sliding guides.
If necessary, using a measuring tape or equivalent, check the points of symmetry of the sunshade in relation to the sunroof frame.
Install the sunshade motor