LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Renegade Red >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Body - Interior And Exterior (2 Of 3) >> DECKLID/Hatch/Liftgate/Tailgate/Swing Gate >> Liftgate >> Disassembly And Assembly >> Assembly

Disassembly And Assembly: Assembly

GC0163909Courtesy of CHRYSLER GROUP, LLC
  1. Position the tail lamp pad (2b) and install NEW  rivets (2a).
  2. Install the rubber bumper (1).
    GC0163232Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wire harness connector to the license lamp (1a).
  4. Install the license lamp.
    GC0163686Courtesy of CHRYSLER GROUP, LLC
  5. Connect the wire harness connector to the liftgate release switch (2b).
  6. Install the liftgate release switch.
  7. Install the liftgate latch (1b). Refer to LATCH, LIFTGATE, REMOVAL AND INSTALLATION .
  8. Install the liftgate. Refer to LIFTGATE, REMOVAL AND INSTALLATION .
  9. Install the liftgate glass. Refer to GLASS, LIFTGATE, REMOVAL AND INSTALLATION .
  10. Install the wiper motor. Refer to REAR WIPER MOTOR, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals