When Monitored

This diagnostic runs once per driving cycle when the following conditions are met:

• Transmission is in Drive or Reverse.
• No other error detected on drive clutch.
• 1st, 2nd, 3rd, 4th, 5th or Reverse gear is engaged and is the actual required gear.
• Clutch closing is not requested.
• Transmission is not in Limp In mode.
• Clutch slip is than a calibrated threshold.
• Electronic differential lock is off.
• Rotation of wheel direction coincides with gear position.
• Throttle position is less than 0.3992%.
• Throttle position is greater than 10 Bar (145 PSI).
• Delay timer "Survey Active" is greater than 0.1 second.