Default Action
WARNING: This page is about a different variant/trim than selected.
- Malfunction Indicator Lamp (MIL) is illuminated on the first trip that the diagnostic fails.
- The Transmission will be placed into Third Gear Limp-in mode.
- The TCM will not request any positive torque interventions from the Powertrain Control Module (PCM) via CAN.
- The Torque Converter Clutch (TCC) will be commanded open.
- Clutch adaptation functions will be disabled.
- Maximum system hydraulic pressure will be applied.
- Special shifting modes (Manual Mode, Sport Mode, Tow Mode) will be disabled.
- Electric Stop/Start function, if equipped, will be disabled.