Gr8 Battery Tester / Charger: Notes
WARNING: This page is about a different variant/trim than selected.
Always use the Midtronics GR8 Instruction Manual that was supplied with the tester as a reference. If the Instruction Manual is not available the following procedure can be used:
WARNING:
Always wear appropriate eye protection and use extreme caution when working with batteries.
- Control module: Backlit graphical display and keypad for data entry (1).
- ON/OFF switch: ON/OFF switch turns power on and off to the GR8 (2).
- STATUS light: Lights in conjunction with beeping alarm to indicate transitions and warnings (3).
- Data card slot: For future upgrades via a data card. The slot contains a plastic filler card for protection (4).