Technical Data - Fuel Injectors
WARNING: This page is about a different variant/trim than selected.
The specifications listed below are for typical Fuel Injectors used on low pressure fuel systems:
| FUEL INJECTOR TECHNICAL SPECIFICATIONS | |
|---|---|
| Fuel Injector resistance | Typically between 9.0 and 18.0 Ohms. The resistance in a winding will vary with temperature. When checking a Fuel Injector coil it is good practice to compare the resistance of the suspect injector with the other known good injectors. Typically, the difference should be less than 10% between the injectors. |
| Fuel Injector current draw | Peak amperage draw will typically be around 1.0 amp when energized |