Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

CHECK FOR AN ACTIVE DTC

With the scan tool, read Battery Pack Control Module (BPCM) DTCs and record on the repair order.
Record the Freeze Frame Data (If available), Event Data (If available), and Environmental Data.
With the scan tool, erase DTCs.
Using the recorded data, along with the When Monitored and Set Conditions above, operate the vehicle in the conditions that set the DTC.
With the scan tool, read BPCM DTCs.
Did the DTC return?

Yes
- Refer to the Communication Diagnostic Procedure.
No
- Perform the TESTING FOR AN INTERMITTENT CONDITION procedure.