Special Tools

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC	6936 - Spacer (Originally Shipped In Kit Number(s) 6945, 6946, 6947, 6948.)
Courtesy of CHRYSLER GROUP, LLC	9546 - Disconnect Tool (Originally Shipped In Kit Number(s) 9590.)
Courtesy of CHRYSLER GROUP, LLC	9585 - Remover, Bearing Cup (Originally Shipped In Kit Number(s) 9691.)
Courtesy of CHRYSLER GROUP, LLC	9667 - Remover, Seal (Originally Shipped In Kit Number(s) 9691.)
Courtesy of CHRYSLER GROUP, LLC	10377 - Remover/Installer, Guide Sleeve
Courtesy of CHRYSLER GROUP, LLC	10379 - Pins, Valve Body Alignment
Courtesy of CHRYSLER GROUP, LLC	10383 - Plate, Clutch Pressure Test
Courtesy of CHRYSLER GROUP, LLC	C-3281 - Holder, Flange (Originally Shipped In Kit Number(s) 9202, 9202A-CAN, 9202CC, 9299, 9299CC, 9299CC, 9300A-CAN.)
Courtesy of CHRYSLER GROUP, LLC	C-4171 - Driver Handle, Universal (Originally Shipped In Kit Number(s) 9202, 9202A-CAN, 9202CC, 9299, 9299CC, 9299CC, 9300A-CAN.)
Courtesy of CHRYSLER GROUP, LLC	C-637 - Slide Hammer, Universal (Originally Shipped In Kit Number(s) 9202.)
Courtesy of CHRYSLER GROUP, LLC	2054000210 - Installer, Seal Output Shaft