LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (8P75PH Automatic Transmission (Service Information)) >> Cable, Manual Park Release >> Removal And Installation >> Manual Park Release (MPR) Cable >> Removal

Manual Park Release (MPR) Cable: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0203390Courtesy of CHRYSLER GROUP, LLC
    1 - Manual Park Release Cable Bracket Bolts
    2 - Manual Park Release Bracket and Cable Assembly
    3 - Manual Park Release Cable End
  2. Disconnect the Manual Park Release (MPR) cable end from the MPR lever.
  3. Remove the MPR cable bracket bolts and the MPR cable from the transmission.
    GC0201977Courtesy of CHRYSLER GROUP, LLC
    1 - MPR Cable Stays
  4. Remove the cable stays holding the cable to the transmission.
  5. Remove the support and lower the vehicle.
    GC0201108Courtesy of CHRYSLER GROUP, LLC
    1 - MPR Cable (Transmission side)
    2 - MPR Cable (Lever side)
  6. Disconnect the MPR cable from the MPR lever cable and remove from the vehicle.