Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

POWERTRAIN CONTROL MODULE (PCM)

NOTE:

Diagnose any CMP or CKP Sensor faults before continuing. Check for intermittent or loose CMP/CKP connections.

The Powertrain Control Module is reporting internal errors, view repair to continue.

Repair

Replace and program the Powertrain Control Module in accordance with the Service Information. Refer to MODULE, POWERTRAIN CONTROL (PCM), REMOVAL AND INSTALLATION .
Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .