Manual Park Release (MPR) Lever: Removal
WARNING: This page is about a different variant/trim than selected.
| 1 - Closeout Fasteners |
| 2 - Closeout Panel |
- Remove the fasteners and remove the front under hood closeout panel.
1 - Closeout Fasteners 2 - Left Under Hood Closeout Panel - Remove the fasteners and remove the left under hood closeout panel.
1 - Hood Latch Harness Connector 2 - Hood Latch Cable 3 - Hood Latch Bolts 4 - Hood Latch - Disconnect the hood latch cable from the hood latch.
- Remove all the hood latch cable stays from the body.
1 - MPR Cable (Transmission side) 2 - MPR Cable (Lever side) - Disconnect the Manual Park Release (MPR) lever cable from the MPR cable.
- Remove the left cowl trim. Refer to PANEL, COWL TRIM, REMOVAL AND INSTALLATION
.
1 - MPR Handle Bracket To Body Nuts 2 - MPR Lever - Remove the MPR handle bracket to body nuts retaining the MPR lever.
- Remove all the MPR cable stays from the body.
1 - Hood Release Handle 2 - Flat Bladed Tool 3 - Clip - Using a small flat bladed tool, release the clip attaching the hood release handle to the instrument panel.
1 - Grommet - Remove the grommet from the bulkhead and pull the cables into the vehicle.
- Remove the assembly from the vehicle.